Silicon Image Ultra ATA 100/133 IDE RAID PCI Host Controller Card
This card is stand-alone Ultra 100/133 PCI to
IDE/ATA host controller is the perfect single chip
solution for designs based on chipsets without an
integrated IDE host controller or designs which need
to expand the number of IDE channels to accommodate
the growing number of storage peripherals with IDE
interface.
This card is a PCI 2-channel Ultra ATA/133 IDE host
controller based on SILICON IMAGE, with optional
RAID 0, 1/0+1 function.
Any system with a PCI bus interface can simply add
the Ultra 100/133 IDE/ATA interface by adding a card
with the PCI card and loading the driver into the
system.
Features :
Achieves High-Speed data Transfer Rates up to 133/100MB/sec
Internal 32 bit PCI Card
ADD 2 Ultra ATA 133/100 ports
Supports Ultra ATA 133/100/66/33, EIDE/Fast ATA 2 IDE & ATAPI
Devices
Coexists with on board IDE ports and connects up to 4 IDE/ATAPI
Devices
Specifications :
Silicon Image chipset
2 independent IDE/ATA channels
Supports up to 4 IDE/ATA devices
Supports ultra and multiword DAM timing modes
CRC (Cyclical Redundancy Check)
128 bytes buffer
Built in 80-pin cable detect circuitry
Supports External BIOS
Supports bus master DMA at 133 MB/sec PCI burst rate
Supports maximum IDE/ATA data transfer rate of 66 MB/sec
(100MB/sec)
3.3V Operating Voltage with 5V tolerant I/O