Serial ATA (SATA) 1 External eSata port + 2 Internal Sata Port + 1 IDE 133 port RAID PCI Controller Card

This PCI Host Adapter can upgrade your desktop computer to have dual Serial ATA Channels. The board provides a 32bit, 33/66 MHz PCI interface on the host side, fully compliant Serial ATA ports on the device side to access Serial ATA mobile storage devices and standard media such as Hard Disk drive, floppy disk drive, CD-ROM, CD-RW, DVD, DVD-ROM, etc...
3 Serial ATA port (two internal and one external) and one ULTRA ATA IDE 133 port (internal) Ultra ATA port Supports up to four hard drives Breaks the 137GB capacity

Features :

N/a

Specifications :

SATA/150 & Ultra ATA/133 Combo Card
Ultimate SATA speed: Up to 150 MB/s
2 SATA ports and one Ultra ATA port Supports up to four hard drives.
Fix PCI bus version2.2
3 Serial ATA port (two internal and one external) and one IDE 133 port (internal)
IDE port support ATA-33, ATA-66, ATA100, ATA133, ATA/ATAPI-7 spec. Speed can up to 133Mbps
Compliant with Serial ATA 1.0 Specification
Supports two independent Serial ATA ports with data transfer, rate up to 1.5 Gb/s
Option IDE interface can driver two 133M IDE HDD/CD ROM /DVD/DVD RW.
IDE port support ATA-33, ATA-66, ATA100, ATA133, ATA/ATAPI-7 spec. Speed can up to 133Mbps
Plug & Play
3 Ports SATA supports RAID 1/0 0+1, and PIO mode 4/3/2/1/0
Extension to UltraDMA-133 interface for up to 133MB/sec transfer rate
Complies with ATA/ATAPI-6
Support 24 bit hard disk mode >137MB
Supports Microsoft generic IDE operation and Intel bus master DMA operations.
Supports two independent Serial ATA ports with data transfer rate up to 1.5Gb/s.
Supports ATA PIO mode 4, multi-word DMA-mode 2 drives and UltraDMA- mode 6
Serial ATA ( SATA ) Host Controller chip with 32-bit interfacing
Built-in 256 byte FIFO per port for fast read/write operations
PCI interrupt sharing and coexists with main board IDE controller
Redefined Bus Master Programming Interface for IDE controllers to support up to four bus masters in a single function
Supports RAID function 0 and 1
Adjustable stripe size for RAID 0
Supports co-exist RAID SET AND Non-RAID HDD
Allow HDDs with different sizes to be configured in a RAID set

BACK